SAGP-648E - IEI SAGP-648E CPU Board. PIAGP Socket-478 Based CPU board with AGP 8X, Serial-ATA, USB2.0 & 1394

SAGP-648E - IEI SAGP-648E CPU Board. PIAGP Socket-478 Based CPU board with...

IEI SAGP-648E CPU Board. PIAGP Socket-478 Based CPU board with AGP 8X, Serial-ATA, USB2.0 & 1394 Simple Type: CPU Board

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

Chip: SiS Xabre400 + SiS 301 V-RAM: On board 64 MB DDR SDRAM
Dual Display: Supports VGA & VGA or VGA & TV-Out or VGA & LCD
I/O Connector:Support CRT display: 1 x 15 pin D-SUB15VGA Connector, 1 x by pin-header, Support DVI interface
Resolution: MAX. 2048x1536, 32bit for CRT display Support AGP 8X bus to enhance graphics performance

General

Audio: AC 97 Codec, 6W Amplifi er( support line-in, line-out, mic-in, speak-out)
CPU: Socket-478 base support Intel Pentium 4/ Celeron up to 533MHz FSB
Digital I/O: TTL Level 4-Input; 4-Output
Display: Support AGP 4X/ 8X interface (Add-on AGP card required)
Ethernet: On-Chip SiS900, 1 x 10/100Mbps Ethernet with RJ-45 onboard
Hardware Monitoring: Provides CPU Vcore, Vcc, CPU/ system fan speed and temperature detecting function
I/O: 2 x RS-232 serial port, 1 x PS/2 connector for keyboard/mouse, 1 x LPT parallel port supports SPP/ ECP/ EPP Mode, 4 x USB 2.0, 2 x ATA-133 IDE channel supports CD-ROM, ZIP, and LS-120 drive bootable, 2 x Serial-ATA, equipped with 2 Serial-ATA cable set, 1 x FDD connector
IEEE-1394: 2 x IEEE-1394a 400Mbps port onboard (RTL8801)
Operation Temperature: 0~60ºC
Power Consumption: 5V@7.3A, -12V@60mA, 12V@4.8A( P4 2.4G/DDR333)
Power control function: Meets ACPI 1.1 specifi cation
Processor: Intel Pentium 4
Relative Humidity: 5~95%, non-condensing
SSD: One Compact Flash Type II socket
System chipset: SiS648 + SiS963
System memory: 2 x DDR266/333 SDRAM socket up to 2GB
WDT: Software programmable supports 1 ~ 255 sec system reset