ROCKY-4783EV - IEI ROCKY-4783EV CPU Board | Supports Socket 478 Single Board Computer (SBC) | for Intel Pentium 4 Microprocessors | VGA | LAN | Audio

ROCKY-4783EV - IEI ROCKY-4783EV CPU Board | Supports Socket 478 Single Board...

Request Quote
For Price

Part Number:: ROCKY-4783EV
Model Number:: ROCKY-4783EV
Make:: IEI
Lead Time:: Available
Qty In Stock:: Available

Thank you for choosing IEI ROCKY-4783EV SOCKET 478 PENTIUM 4 Single Board Computer. IEI ROCKY-4783EV board is an ISA/PCI form factor board, which is equipped with a high performance processor and multi-mode I/O, designed for the system manufacturers, integrators, or VARs to provide quality and reliable performance at a reasonable price. In addition, the ROCKY-4783EV has built-in SiS 315 AGP4X VGA on board. The VGA chip is a 3D graphics chipset, which provides up to 2,048 x 1, 536 x 16-color resolution. The VGA on board can share 4 ~64 MB DDR-SDRAM frame buffer of system memory. For the application that needs high-speed serial transmission, ROCKY-4783EV provides both 1394 and USB 2.0 ports for your choice. The high speed USB 2.0 host controller implements an ECHI interface that provides 480Mb/s bandwidth. The integrated 1394a controller supports bus transfer rate of 400 Mbits/s. An advanced high performance super LPC I/O chip— W83697HF is used in ROCKY-4783EV board. Both on-chip UARTs are compatible with the NS16C550. The parallel port and IDE interface are compatible with IBM PC/AT architecture. ROCKY-4783EV has a built-in 10/100 Fast Ethernet LAN. It is a fully integrated 10BASE-T/100BASE-TX LAN solution with high performance and low power consumption features. ROCKY-4783EV uses the advanced SiS 651/962 chipsets, which are 100% software compatible chipset with PCI 2.2 standard.

Download the datasheet (PDF)

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

Features

10BASE-T/100BASE-TX
Bi-directional parallel port
Compactflash
Hardware monitor
Intel Pentium 4 Processor, supports 400/533MHz FSB
PCI/ISA bus, PICMG compliant
Supports four USB 2.0/1.1 ports
Supports up to two floppy disk drives
Two 184-pin DIMM sockets to support DDR266/333 SDRAM, max. memory up to 2 GB
Two RS-232 ports with 16C550 UART (or compatible) with 16-byte FIFO buffer
Up to four PCI Enhanced IDE hard drives
VGA controller built-in SiS 315 AGP4X 256-bit 3D graphics engine, 4~64 MB share memory
Watchdog timer

Specifications

General

(DDR 200/ 266/ 333 MHz): System
ATX power control function: Meet ACPI 1.1
Audio: AC’97 compliant Audio CODEC (Line-in, Line-out, Mic-in by pin header)
Board Type: Full Size
CPU: Socket-478 base support Intel® Pentium 4 /Celeron™ up to 533 MHz FSB
Display: Chipset integrated 2D/3D Graphics Engine (SiS 651), AGP 4 x bus, Chipset integrated 2D/3D Graphic Engine, up to 1600x1200 (UXGA)resolution,
Ethernet: 1x 10/100Mbps fast Ethernet controller onboard (in SiS 962)
GW: 900g
I/O: 2x RS-232 series port by pin header (16C550 UARTs Compatible), 1x LPT by pin header (support SPP/EPP/ ECP mode),1x IrDA (SIR mode), 4xUSB (USB 2.0 Compliant), 1x FDD channel support 1.44MB, 2.88MB and 3-mode, 2x ATA-133 IDE channel support CD-ROM; ZIP and LS-120 bootable
IEEE-1394: 3x port IEEE-1394a 400Mbps
ISA Plus™: Design to enhance the ISA bus drive capability (64mA) Hardware Monitoring (CPU Vcore; Vcc; CPU/System Fan speed and Thermal)
Operating Temp: 0~60°C (CPU cooler required) Relative Humidity
Power Consumption: +5V@3.1A, +12V@7.2A (P4 2.0GHz CPU with 2GB DDR SDRAM, Windows 2000)
Processor: Intel Pentium 4
SSD: 1x Compact Flash™ Type II socket onboard
System Chipset: SiS651 + 962
System Memory: 2x 184pin DIMM up to 2GB DDR SDRAM
V-RAM share system memory up to 64MB, DB-15 for CRT display: Graphics
Watchdog Timer: Software programmable support 1~255 second system reset

Applications

None Available

Aliases

None Available

IEI Industrial Partner