JUKI-730 - IEI JUKI-730 Single Board Computer with LCD/CRT and 4COM Simple...
Request Quote
For Price
- Part Number:
- JUKI-730
- Model Number:
- JUKI-730
- Make:
- IEI
- Lead Time:
- Available
- Qty In Stock:
- Available
IEI JUKI-730 Single Board Computer with LCD/CRT and 4COM Simple Type: CPU Board
Thank you for choosing JUKI-730 386SX with LCD/CRT/4COM Single Board Computer. The JUKI-730 is an ISA with PC/104 form factor board, which comes equipped with ALI 6117 (386SX CPU included) and an advanced high-performance multi- mode I/O, designed for the system manufacturers, integrators, or VARs thatwant to provide all the performance, reliability, and quality at a reasonable price. An advanced high performance super AT I/O chip Windbond W83877F and SMC FDC37C669 are used in the JUKI-730 board. Both on-chip UARTs are compatible with the NS16C550 and one COM port can be set in RS232, RS422, or RS485. The parallel port and IDE interface are compatible with IBM PC/AT and XT architectures, as well as EPP and ECP. The LCD/CRT controller is TOPRO TP-6508, which can provide both LCD and CRT display at the same time. The LCD interface connector is a 44-pin 2.0mm pitch type. The most outstanding feature in the JUKI-730 is the built-in PC/104 expansion bus. Based on the PC/104 bus, you could easily install over thousands of PC/104 modules manufactured by hundreds of vendors worldwide. Aside from that, the JUKI-730 has an external power connector that allows direct connection to a power supply making it more suitable for your standalone applications.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- high-performance multi- mode I/O
- LCD/CRT controller Dual Display
- PC/104
- super AT I/O chip Windbond W83877F and SMC FDC37C669
Specifications
- Chipset: TP-6508
- CPU: ALI 6117,includes 386SX CPU
- Dimension: 180mm(W) x 122mm(L), standard AT form factor.
- Display Memory: 1MB on board.
- DMA Channels: 7
- External Power Connector: 8-pin male connector (Molex 6410 series compatible)
- FDD Interface: Supports two 2.88 MB, 1.44MB, 1.2MB, 720KB, or 360KB floppy disk drives. Can be disabled through BIOS Setup Menu setting.
- Humidity: 5% ~ 95%, non-condense
- IDE HDD Interface: Supports up to two IDE hard disk drives. Can be disabled through BIOS Setup Menu setting.
- Interrupt Levels: 15
- Keyboard Connector: A 5-pin header on board and
- Multi-Mode Parallel: Standard mode - IBM PC/XT, PC/AT, PS/2 compatible bi-directional parallel port, Enhanced mode - Enhanced parallel port (EPP)
- Operating Temperature: 0 ° ~ 55° C
- PC/104: A 64-pin and 40-pin, industrial embedded-PC bus standard.
- Power Consumption: +5V @ 1.53A ( 40MHz,8MB RAM)
- RAM Memory: 512KB to 32MB, only support single
- Resolution: Support up to 800 x 600 resolution for STN and TFT LCD Flat Panel. And Support 1024x768 256 colors for CRT display.
- RTC: DS12887/BQ3287 or equivalent chip and quartz oscillator, 128B CMOS memory, powered by lithium battery for over 10 years of data retention.
- Serial Ports: NS16C550 compatible UARTs with send/receive 16-byte FIFOs, data rates are independently programmable from 115.2K baud down to 50 baud. The modem controls the circuitry.
- Shadow RAM Memory: C0000h ~ DFFFFh
- System BIOS: 0E0000h ~ 0FFFFFh
- Watchdog Timer: Can be set to 1,2,10,20,110,or
Applications
- None Available
Aliases
- None Available