SAGP-815EV - IEI SAGP-815EV CPU Board. PIAGP Socket 370 Based Single Board...
Request Quote
For Price
- Part Number:
- SAGP-815EV
- Model Number:
- SAGP-815EV
- Make:
- IEI
- Lead Time:
- Available
- Qty In Stock:
- Available
IEI SAGP-815EV CPU Board. PIAGP Socket 370 Based Single Board Computer | Intel Pentium III and Celeron with 10/100Mbps Ethernet | AGP 4X Bus | LAN | USB2.0 & Audio Simple Type: CPU Board
Welcome to SAGP-815EV socket 370 base Single Board Computer. Based on Intel i815EB chipset, SAGP-815EV board is a PIAGP form factor board which works perfectly with high performance Pentium® III, or cost-effective Celeron. This product is designed for system manufacturers, integrators, or VARs that want to provide all the performance, reliability, and quality at a reasonable price. The advantages of migrating to PIAGP architecture are numerous. To name a few: 1. It supports standard AGP V2.0 cards on the PCIAGP/PXAGP series passive backplane; 2. It is compatible with all available AGP cards; 3. With optional PISA-KIT1 PCI-to-ISA bridge module, legacy ISA device are also supported; 4. Many PCIAGP/PXAGP series passive backplanes support conventional PICMG CPU cards; 5. Onboard RAID controller is available as an option on certain PCIAGP/PXAGP series passive backplanes, making storage capability of your industrial PC several steps forward. In addition, SAGP-815EV’s on-chipVGA provides up to 1600x1200 resolution. The VGA subsystem shares main memory. An advanced high performance super AT I/O chip – ITE IT8712 is used in the SAGP-815EV board. Which provide two UARTs are SAGP-815EV Socket 370 Based SBC With 10/100Mbps Ethernet , VGA , Audio 6 compatible with the NS16C550. The parallel port and IDE interface are compatible with IBM PC/AT architecture. SAGP-815EV has an Intel 82562BA as its integrated LAN controller. It meets the 10/100BASE-TX specification with high performance networking functions and advanced features like Alert-on-LAN. SAGP-815EV’s Intel 815EB chipset supports up to 133MHz FSB CPU and 133MHz SDRAM memory modules. This PIAGP CPU card must be installed on IEI PCIAGP/PXAGP series backplanes. If onboard ISA interface is required, please be sure to install PISA-KIT01 daughter board on the specific socket on the backplane before ISA cards are installed to make sure the system works properly.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 15 Interrupt levels
- 7 DMA channels
- CMI8738LX supports 6CH DAC for AC-3 5.1 channel purpose, HRTF–based positional audio, supporting DirectSound 3D and A3D
- Intel 815EB chipset
- Intel 82562BA embedded LAN Controller
- interface.
- On-chip VGA controller, screen resolution up to 1600x1200 in 256 Colors at 85Hz refresh rate
- One IEEE1284 compatible Bi-directional parallel ports
- Provides two 168-pin DIMM socket, Max. memory size is 512MB/133MHz.
- Single 2.88 MB, 1.44MB, 1.2MB, 720KB, or 360KB floppy disk drive
- SIR and ASKIR interface
- Supports 4 USB 2.0 compatible ports
- Supports CompactFlashTM Type II socket for Compact Flash Disk or IBM Micro Drive
- Supports Socket-370 CPU Celeron Processor up to 1.2GHz/Pentium III (FC-PGA) Processor up to 1.4GHz
- Two high-speed 16C550 compatible UARTs ports
- Two PCI EIDE channel; The onboard ICH2 supports Ultra ATA/33/66/100 IDE interface
- Watchdog timer
Specifications
- Audio: Onboard C-Media CMI8738 5.1 channel audio chip
- Bus Interface: AGP 4X, 66MHz (when you plug in AGP VGA card with the SAGP-815EV CPU board, it will automatically disable the SAGP-815EV's internal VGA function
- Chipset: Intel 815E stepping chipset
- CPU: Supports Intel Coppermine/Tualatin socket-370 series Pentium III and Celeron CPU with 66/100/133 MHz FSB
- Driver: Built-in FW82815 chip
- Ethernet: Onboard 10/100Mbps Fast ethernet controller (82562ET PHY)
- I/O: 2x ATA/100 IDE channel support CD-ROM, ZIP and LS-120 bootable drive 4x USB 2.0 ports 1x FDD channel supports 1.44/2.88MB and 3-mode floppy drive 1x LPT parallel port by pin headers supports SPP/ECP/EEP mode 1x IrDA (SIR) 1x PS/2 connector for keyboard/mouse
- Processor: Intel Pentium III
- System Memory: 2x 168pin SDRAM socket maximum up to 512MB
- VRAM: Shared with system memory (DVMT technology) Resolution: up to 1600x1280@8 bit color Connector: DB-15 for CRT display SSD: 1x onboard Compact Flash type II socket onboard for CF Disk data or IBM Microdrive
- Watchdog Timer: Software programmable supports 1~255 seconds system reset Hardware monitoring: Provides CPU Vcore, Vcc; CPU/System fan speed and temperature detecting function. ATX power control function: meets ACPI 1.1 specification Power consumption: +5V@7.6A; 12V@230Ma (initial 1GHz CPU with 256MB memory) Operating Temperature: 0~ 60oCRelative Humidity: 5~95%, non-condensing.
Applications
- None Available
Aliases
- None Available