NOVA-E667N - IEI NOVA-E667N CPU Board. Series 5.25" Low Power VIA Eden...
Request Quote
For Price
- Part Number:
- NOVA-E667N
- Model Number:
- NOVA-EDEN
- Make:
- IEI
- Lead Time:
- Available
- Qty In Stock:
- Available
IEI NOVA-E667N CPU Board. Series 5.25" Low Power VIA Eden 667MHz CPU | LCD/CRT VGA | AUDIO | USB 2.0 | TV-OUT | CFII | 4xUSB | 4xCOM | 2xATA/100 IDE | PC/104 & PC/104+ | Dual Intel LAN Simple Type: CPU Board
NOVA-E667 is a 5”1/4 form factor CPU board, which comes equipped with a low power consumption and high performance VIA EDEN processor.It is designed for the system manufacturers, integrators, or VARs that want to provide all the performance,reliability, and quality at a reasonable price.In addition, NOVA-E667 built-in the ProSavage4 AGP4X VGA controller. It is a 2D/3D graphics controller, which provides resolution up to 1920X1440, and supports both CRT and LCD simultaneously. The VGA controller can share 8~32MB frame buffer of system memory.For the application that needs high speed serial transmission, NOVA-E667 provides both the USB1.1 and USB2.0 for your choice. The high speed USB2.0 host controller implements an ECHI interface that provides 480Mb/s bandwidth. Both on-chip UARTs are compatible with the NS16C550. The parallel port and IDE interface are compatible with IBM PC/AT architecture. NOVA-E667 built-in 10/100 Fast Ethernet LAN is a fully integrated 10BASE-T/100BASE-TX LAN controller with high performance and low power features. NOVA-E667 uses the advanced VIA VT8606/VT82C686B Chipsets which is 100% software compatible chipset with PCI 2.2 standard.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 16-26AWG Wire Range
- Board Form Factor
- Chipset:Via VT8606T (PN133T) with VT82C686B chip
- Digital Input (4 channels)
- Digital Output (4 channels)
- Dual 10/100Mbps Ethernet Controller
- E2KeyTM Function
- Enhanced PCI IDE interface (Ultra DMA/33)
- Floppy Disk Port
- Isolated Digital I/O Connector
- LCD / CRT Controller
- On board 667MHz Via C3 Eden (Pentium III) CPU
- One EPP / ECP Parallel Port
- PC/104, PC/104 Plus, PCI Connector
- Real-time clock / calendar and battery backup
- Support 3.3V or 5V flat panel
- Support M-Systems DiskOnChipTM Flash Disk Chip from 8MB to 144MB
- Support USB 1.1 / USB 2.0 / IrDA function
- Three RS-232C ports and One RS-232 / 422 / 485 port
- Up to 512MB SDRAM, 1pcs 168-pin DIMM
- Watch-Dog Timer
Specifications
- Audio: AC 97 codec with 6W amplifier
- BIOS: AMI BIOS
- Chipset: Via VT8606T (PN133T)
- Connector: PC/104 (ISA Bus) and PC/104 Plus (PCI Bus) and PCI Bus PS/2 keyboard connector PS/2 mouse I/F
- CPU: On board 667MHz Via C3 Eden (Pentium III) CPU
- Digital I/O: 4 Digital Input 4 Digital Output
- Display Interface: On chip ProSavage VGA controller Support CRT and LCD panel Resolutiion up to 1600 x 1200 (UXGA) TV OUT: Both NTSC and PAL output signal are supported (UXGA)
- Ethernet: Dual Intel 82559: NOVA-E667N or Dual Realtek RTL8100: NOVA-E667R 10/100Mbps RJ-45 connector
- I/O: Multi-I/O Chip Three 16C550 RS-232 ports One 16C550 RS-232/RS-422/RS-485 ports One EPP/ECP parallel port One Floppy I/F One 40-pin IDE I/F (for 3.5" HDD/CDROM) One 44-pin IDE I/F (for 2.5" HDD)
- Memory: RAM: Up to 512MB (One SDRAM memory)
- Operating Humidity: 0 to 90% non-condensing
- Operating Temperature: +0°C to +60°C
- Power Supply: +5V/3.1A
- Processor: VIA C3
- SSD: Support DiskOnChipTMflash disk chip Onboard Compact Flash type II socket
- USB: Two on board USB 1.1 ports (12Mb/s (1.5Mb/s)) Two on board USB 2.0 ports (480Mb/s (60 Mb/s))
- Watchdog Timer: Can be set by 1, 2, 10, 20, 110 or 220 seconds period. RESET or NMI was generated when CPU did not periodically trigger the timer
Applications
- None Available
Aliases
- None Available