ACE-818C - IEI ACE-818C Power Supply - IEI +24 VDC input 140...
Request Quote
For Price
- Part Number:
- ACE-818C
- Model Number:
- ACE-818C
- Make:
- IEI
- Lead Time:
- Available
- Qty In Stock:
- Available
IEI ACE-818C Power Supply - IEI +24 VDC input 140 W ATX / battery backup function power supply Simple Type: Power Supply
The ACE-810V/818C is designed for mobile PC applications. The most valuable feature is that it has a secondary battery input that keeps the power supply running when the primary 12V DC or 24V DC is lost. Then the power supply switches to battery backup mode. ACE-810V/818C two kinds of signals VS1 and VS2. After the primary lost message is displayed, the PC may do a system shutdown that is controlled by the software program
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- Efficiency: Higher than 70% at 12V or 24VDC input
- Input polarity operation: When wrong polarity is connected to input terminal, should not cause any damage on the power supply.
- Min. Load: +5V/0.5A +12V/0.2A
- MTBF: 112,388 hrs (ACE-810V), 109,696 (ACE-818C)
- Protection: over voltage, short circuit, and over load protection.
- Safety: UL 1950, TUV EN 60950: 2000 meets CE
- Shock : 10G for 11ms half sine wave, one time for each of ±X, ±Y , ±Z axis.
- Storage : 2 x 2.5" HDD drive bays with RAID controllor on system board meet MIL-STD-810F 514.5C-1 standard (Military specification).
- Vibration: 10Hz~55Hz at 2G, 3minutes period, 30 minutes along X, Y, and Z axis.
Specifications
- Battery Backup and Hold up time: Upon loss of DC input, the unit must operate from the battery. Hold up time is around 2 minute on the battery capacity.
- Connectors: TB1:Primary DC Input-3-position Terminal Blocks: TB2:DC output-6-position Terminal blocks; TB3:auxiliary 8-pin connector; TB4:Battery input-2-position Terminal blocks
- Efficiency: Higher than 70% at 12V or 24VDC input
- EMI: Designed to meet the following radiation limited: FCC docket 20780 curve “B” EN55022 class “B”
- EMS: Designed to meet the following limits: EN61000-4-2 4KV contact; 8KV air discharge Criterion B, EN61000-4-3 10V/M with 80% AM Criterion A, EN61000-4-4 2KV Criterion B, EN61000-4-5 0.5KV Criterion B
- Fan: Built-in cooling fan
- Input Current: 10A@+24VDC
- Input polarity operation: When wrong polarity is connected to input terminal, should not cause any damage on the power supply.
- Input Range: +18V~+32VDC
- Min. Load: +5V/0.5A +12V/0.2A
- MTBF: 110,000 hrs
- Operating temperature: 0~50ºC
- Power On Signal: This TTL compatible signal (active low) is use to switch ON the main output. When “Power ON” is disconnected from secondary common, all outputs except +5Vsb shall turn off.
- Protection: over voltage, short circuit, and over load protection.
- Safety: UL 1950, TUV EN 60950: 2000 meets CE
- Shock: 10G for 11ms half sine wave, one time for each of ±X, ±Y , ±Z axis.
- Storage temperature: -20 ~85ºC
- Vibration: 10Hz~55Hz at 2G, 3minutes period, 30 minutes along X, Y, and Z axis.
Applications
- None Available
Aliases
- None Available