PCI-9820D - PCI-9820D - 4-CH 14-bit 21MS/s simultaneous-sampling multi-function DAQ card Simple...
Request Quote
For Price
- Part Number:
- PCI-9820D
- Model Number:
- PCI-9820D
- Make:
- IEI
- Lead Time:
- Available
- Qty In Stock:
- Available
PCI-9820D - 4-CH 14-bit 21MS/s simultaneous-sampling multi-function DAQ card Simple Type: Data Acquisition
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- None Available
Specifications
- [Analog Input] Bandwidth (-3 dB): 30 MHz minimum
- [Analog Input] Coupling: AC
- [Analog Input] Crosstalk: -80 dB, DC to 1MHz
- [Analog Input] Data transfer: Bus mastering DMA with scatter-gather
- [Analog Input] External Timebase Input Connector: SMB
- [Analog Input] Frequency range: 500kHz~65MHz
- [Analog Input] Impedance: 50 ohm
- [Analog Input] Input amplitude: 1~2Vpp
- [Analog Input] Input coupling: DC
- [Analog Input] Input Impedance (soldering selectable): 50 ohm, 1.5M ohm
- [Analog Input] Input signal ranges (software programmable): +/-5V, +/-1V
- [Analog Input] Maximum sampling rate: 65 MS/s for 2 inputs. 130 MS/s for Ping-Pong mode
- [Analog Input] Number of channels: 2 simultaneous-sampled single-ended
- [Analog Input] On-board sample memory: 128 MB, standard. Up to 512 MB, optional
- [Analog Input] Overvoltage protection: 2.5Vpp
- [Analog Input] Resolution: 14 bits
- [Analog Input] Signal-to-Noise ratio (SNR): +/-5V range: 66 dB. +/-1V range: 62 dB
- [Analog Input] Spurious-free dynamic range (SFDR): 75 dB
- [Analog Input] Total harmonic distortion (THD): -75 dB
- [Analog triggering] Coupling: DC
- [Analog triggering] Modes: Pre-trigger, post-trigger, middle-trigger, delay-trigger
- [Analog triggering] Slope: Rising/ falling
- [Analog triggering] Source: CH0 and CH1
- [Analog triggering] Trigger sensitivity: 256 steps in full-scale voltage range
- [Digital I/O] Compatibility: 5V/ TTL
- [Digital I/O] Minimum pulse width: 10ns
- [Digital I/O] Modes: Pre-trigger, post-trigger, middle-trigger, delay-trigger
- [Digital I/O] Post-trigger depth: 128 MB or 512 MB, depending on memory option
- [Digital I/O] Pre-trigger depth: 128 MB or 512 MB, depending on memory option
- [Digital I/O] Repeated trigger rearming interval: 2 cycles of timebase
- [Digital I/O] Slope: Rising/falling
- [Digital I/O] Source: External digital trigger from SMB
- Auto Calibration On-board reference: +5V. Temperature drift: 2 ppm/ ?. Stability: 6 ppm
- Bus Interface: 32-bit PCI Bus, 3.3V or 5V
- Function: 2-CH 14-Bit digitizer with SDRAM
- I/O Connector: 2 x BNC (analog inputs) 2 x SMB (external digital trigger and external timebase)
- Power Requirement: +5V/ 895mA, +12V/ 295mA, +3.3V/ 310mA with 128MB SDRAM (430mA with 512MB SDRAM)
Applications
- None Available
Aliases
- None Available