NEAT-450P - NEAT-450P - PISA Bus Half-Size 486 CPU Card With LCD/CRT...
Request Quote
For Price
- Part Number:
- NEAT-450P
- Model Number:
- NEAT-450P
- Make:
- IEI
- Lead Time:
- Available
- Qty In Stock:
- Available
NEAT-450P - PISA Bus Half-Size 486 CPU Card With LCD/CRT VGA, Ethernet, DOC Flash Disk, PC/104 Interfaces Simple Type: CPU Board
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- +5V, 2.5A max power requirement
- 32-bit PISA (PCI+ISA) Bus external bus on half-length form factor
- Award by flash or EPROM
- Complies with PICMG standard (PICMG2.0 R2.1)
- memory expansion
- On board C&T65550 LCD/CRT VGA Controller with 1MB display memory
- One RS-232, and one RS-232/422/485 selectable serial ports
- PC/104 interface for expansion DiskOnChip socket supports up to 288MB
- Support 486 processors up to DX5-133MHz
- Two 72-pin SIMM sockets for
Specifications
- BIOS: Award BIOS
- Bus: PISA (PCI+ISA) external Bus
- Cache: 256KB 2 level cache memory
- Chipset: ALi M1487/M1489 system chipset
- CPU: 486 or compatible PGA socket up to 133MHz
- Display Chipset: C&T65550 PCI Bus for CRT and flat-panel
- Display Connectors: 15-pin CRT VGA and 2x22 pin flat-panel connectors
- Display Memory: 1MB EDO DRAM (factory option 2MB)
- Expansion Bus: One 16-bit PC/104 connector for expansion
- FDD Interface: One channel supports up to two floppy disk drivers, 3.5" and/or 5.25"
- Flash Disk Socket: DiskOnChip socket supports up to 288MB
- Form Factor: 185mm x 122mm (7.3" x 4.8")
- I/O Chipset: SMC 37C669
- IDE Interface: One channel supports two PCI mode 4 enhance IDE hard disk devices
- Keyboard Connector: One 6 pin Mini-Din connector is located on the mounting bracket, another 5-pin external KBD connector
- LAN: RTL 8019AS controller, 10BaseT with RJ-45 connector on board
- Memory: Two 72-pin SIMM sockets, accept 1,2, 4,8,16 or 32MB EDO SIMM memory
- Operating Temperature: 0 to 60 C (32 to 140 F)
- Parallel Port: One Enhanced Bi-directional parallel port, EPP/ECP modes supported
- Power Requirement: Single power +5V@2.5A, 8-pin external power connector
- Real Time Clock: SGS M48T86 PCI (or compatible) with lithium battery backup for 10 years of data retention
- Relative Humidity: 10% to 90%, non-condensing
- Serial Port: Two 16C550 UART, one RS-232 and one RS-232/422/485 selectable serial ports
- Storage Temperature: -20 to 80 C
- Watch-Dog Timer: Timer interval is 0~64 sec. (14 level) with capability to generate system reset
Applications
- None Available
Aliases
- None Available