ACE-R20A - IEI ACE-R20A Power Supply - 200W PEAK,AC Input Redundant...
- Part Number:
- ACE-R20A
- Model Number:
- ACE-R20A
- Make:
- IEI
- Lead Time:
- Available
- Qty In Stock:
- Available
IEI ACE-R20A Power Supply - 200W PEAK,AC Input Redundant Power Supply Simple Type: Power Supply
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- None Available
Specifications
- Altitude: 0 ~ 10,000ft
- Efficiency: Higher than 65%
- EMI: Meets FCC docket 20780 curve “B”, EN55022 class “B”
- EMS Standard (Designed to meet the following limits): IEC 801-2 8KV (Air Discharge) criteria B; IEC 801-3, 10V/M criteria A; IEC 801-4, 2KV criteria B
- Fan: Built-in cooling fan
- Hold-up Time: 14ms (typical)@115V AC
- Impact: 10G for 20ms once on each X, Y and Z axis
- Input Current: 4A@115V AC or 2A@230V AC
- Input Range: 85~265V AC,47~63Hz
- Line Regulation: Less than 2%@+12V, 1%@Others
- Load Regulation: +5V:<±3%; +12V:<±5%; -12V:<±2%; -5V:<±2%
- MTBF: 131,547 Hours
- Operating temperature: -20º ~ 70ºC (Derating curve will occur 45º ~ 70ºC)
- Power Fail Alarm: It will turn the red LED and beeper when power fail
- Power Fail Signal: The power fail signal will go low at least 0.5ms before any of the output voltages fall below the regulation limits
- Power Sharing & Redundancy: These power have power sharing and redundancy capability. When doing that the power share line (Pin 32) must connect with each other
- Protection: Over voltage protection:The trip point is around 5.7V ~ 7.0V output; Short circuit protection; Thermal protection with built-in 110±5ºC thermal switch in HS1
- Ripple and Noise: Less than 140mV@+12V and 1%@Others
- Safety: CSA 22.2 No. 234
- Storage temperature: -40º ~ 75ºC
- Vibration: 10 ~ 55Hz at 2G 3min. period, 30 min. along X, Y and Z axis
Applications
- None Available
Aliases
- None Available
