ACE-915AP - IEI ACE-915AP Power Supply. 150W | AT form factor | Overload protection | Overvoltage protection | Power fail and remote inhibit

ACE-915AP - IEI ACE-915AP Power Supply. 150W | AT form factor |...

***EOL***ACE-916AP suggested replacement not a drop in it is missing -5V output.

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

General

Adjustment range: 1.8V - 3.5V; 3.0V - 5.5V on outputs one and two
Case overload: protected @ 110-145% above peak rating. Latching type recycle AC to reset.
DC O: TTL logic signal goes high after main output is in regulation. It goes low when there is a loss of regulation.
Efficiency: 65% typical at full load @ 115 VAC input
EMI filter: FCC Class B conducted and radiated,
Frequency: 47-63 Hz
Hold-up time: 20 ms @ 165 W load
Input range: 85-264 VAC
Inrush Current: 38 A max., cold start @ 25°C
Maximum power: 50W convection, 165 W with 30 CFM forced air
Overload Protection: Short circuit protection on all outputs.
Overvoltage Protection: Tracks outputs 1 & 2: 20% to 35% above output setting
Power Factor: 0.99 typical
Power failure: TTL logic signal goes high 100-500 msec after V1 output; it goes low at least 4 msec before loss of regulation
Remote Inhibit: Requires contact closure to inhibit outputs
Remote sense: Compensates for 0.5 V lead drop minimum, will operate without remote sense connected. Reverse connection protection.
Standby output: 5V@ 2 A regulated ±5%