DAQ-2208 - DAQ-2208 - 96-CH 12-bit 3MS/s ultra high density analog input...
- Part Number:
- DAQ-2208
- Model Number:
- DAQ-2208
- Make:
- IEI
- Lead Time:
- Available
- Qty In Stock:
- Available
DAQ-2208 - 96-CH 12-bit 3MS/s ultra high density analog input card Simple Type: Data Acquisition
4-CH 14-bit 11MS/s simultaneous-sampling multi-function DAQ card.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- None Available
Specifications
- [Analog Input] -3dB small signal bandwidth (gain: 1)
- [Analog Input] Bipolar input ranges: +/-10V, +/-5V, +/-2.5V, +/-1.25V, +/-1V, +/-0.5V, +/-0.25V, +/-0.2V, +/-0.05V
- [Analog Input] Channel gain queue size: 1024
- [Analog Input] CMRR (gain: 1)
- [Analog Input] Data Transfers: Polling, scatter-gather DMA
- [Analog Input] FIFO buffer size: 1k samples
- [Analog Input] Gain error: ±0.03 % of FSR
- [Analog Input] Input Coupling: DC
- [Analog Input] Input Impedance: 1G ohm/ 100pF
- [Analog Input] Maximum sampling rate: 3MS/s
- [Analog Input] Number of channels: 96 single-ended or 48 differential (software selectable per channel)
- [Analog Input] Offset error: +/-1mV
- [Analog Input] Overvoltage protection: Continuous +/-30V (power on) Continuous +/-15V (power off)
- [Analog Input] Programmable gain: 1, 2, 4, 5, 8, 10, 20, 40, 50, 200
- [Analog Input] Resolution: 12 bits, no missing codes
- [Analog Input] Settling time: 1 µS~0.1 % error
- [Analog Input] Trigger modes: Pre-trigger, post-trigger, middle-trigger, delay-trigger, and repeated trigger
- [Analog Input] Trigger sources: Software, external digital/analog trigger, SSI bus
- [Analog Input] Unipolar input ranges: 0~10V, 0~5V, 0~4V, 0~2.5V, 0~1V, 0~0.5V, 0~0.4V, 0~0.1V
- [Auto Calibration] On-board reference: +5V
- [Auto Calibration] Stability: ±6 ppm/1000 Hrs
- [Auto Calibration] Temperature drift: +/-2 ppm/ ?
- [Digital I/O] Compatibility: 5 V/ TTL
- [Digital I/O] Data transfers: Programmed I/O
- Bus Interface: 32-bit PCI Bus, 3.3V or 5V
- Bus Interface: 32-bit PCI Bus, 3.3V or 5V
- Function: Ultra high density analog input card
- I/O Connector: 68-pin SCSI II connector x 2
- Power Requirement: +5V/ 950mA typical
Applications
- None Available
Aliases
- None Available
