DAQ-2214 - DAQ-2214 - 16-CH 16-bit 250KS/s low-cost multi function DAQ card,...
- Part Number:
- DAQ-2214
- Model Number:
- DAQ-2214
- Make:
- IEI
- Lead Time:
- Available
- Qty In Stock:
- Available
DAQ-2214 - 16-CH 16-bit 250KS/s low-cost multi function DAQ card, with 2-CH analog outputs Simple Type: Data Acquisition
4-CH 14-bit 13MS/s simultaneous-sampling multi-function DAQ card.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- None Available
Specifications
- [Analog Input] -3dB small signal bandwidth (gain:1): 760kHz
- [Analog Input] Bipolar input range: +/- 10V, +/- 5V, +/- 2.5V, +/- 1.25V
- [Analog Input] Channels: 16 signal-ended or 8 differential (software programmable per channel)
- [Analog Input] CMRR (gain:1): 83dB
- [Analog Input] Data transfers: Polling, scatter-gather DMA
- [Analog Input] FIFO buffer size: 1K samples
- [Analog Input] Gain error: +/- 0.01% of FSR
- [Analog Input] Input coupling: DC
- [Analog Input] Input Inpedance: 1G ohm/100pF
- [Analog Input] Max. simple rate: 250KS/s
- [Analog Input] Offset error: +/- 1mV
- [Analog Input] Overvoltage protection: Power/On-Continuous +/-30V; Power/Off- Continuous +/-15V
- [Analog Input] Programmable gain: 1, 2, 4, 8
- [Analog Input] Resolution: 16 bits, no missing codes
- [Analog Input] Settling time: 4µS~0.01% error
- [Analog Input] Trigger mode: Pre-trigger, Post-trigger, Middle-trigger, delay-trigger, repeated trigger
- [Analog Input] Trigger source: Software, external digital/ analog trigger, SSI bus
- [Analog Input] Unipolar input range: 0~10V, 0~5V, 0~2.5V, 0~1.25V
- [Analog Output] Data transfers: Programmed I/O, scatter-gather DMA
- [Analog Output] Driving capacity: +/-5mA
- [Analog Output] FIFO buffer size: 1 k samples
- [Analog Output] Gain error: ±0.02% of max. output
- [Analog Output] Maximum update rate: 1 µS
- [Analog Output] Number of channels: 2 voltage outputs
- [Analog Output] Offset error: +/-1mV
- [Analog Output] Output ranges: 0~10V, +/-10V, 0-AOEXTREF, +/-AOEXTREF
- [Analog Output] Resolution: 12 bits
- [Analog Output] Settling time: 3µS~+/-0.5 LSB accuracy
- [Analog Output] Slew rate: 20V/ µS
- [Analog Output] Stability: Any passive load, up to 1500pF
- [Analog Output] Trigger modes: Post-trigger, delay-trigger, and repeated trigger
- [Analog Output] Trigger sources: Software, external digital/analog trigger, SSI bus
- [Auto Calibration] board reference: +5V
- [Auto Calibration] Stability: 6ppm/ 1000 Hrs
- [Auto Calibration] Temperature drift: +/- 2ppm/ C
- [Digital I/O] Channels: 24-CH 8255 programmable input/ output
- [Digital I/O] Compatibility: 5V/ TTL
- [Digital I/O] Data transfers: Programmed I/O
- [Timer/ Counter] Channels: 2
- [Timer/ Counter] Compatibility: 5V/ TTL
- [Timer/ Counter] Resolution: 16 bits
- Bus Interface: 32-bit PCI Bus, 3.3V or 5V
- Function: High performance low-cost multi-function DAQ card
- I/O Connector: 68-pin VHDCI female x 2
- Power Requirement: +5V/ 1.2A typical
Applications
- None Available
Aliases
- None Available
